Product Classified
Cold classification
Industry classification
Katina Jeong
Mp:+86-13661848129
Skype:kitty.ch1014
Tel:+86-21-64787454
Fax:+86-21-57639842
Email:katina.j@shkende.com
★ cold cold :
Cold drinks cold , cold ice cream , ice cream and other semi- enclosed cold storage units, ducted evaporator, 5 face covered with cold pipes to ensure cold storage insulation !
Applicable popsicle , ice cream , cold drinks, ice cream, and other frozen drinks stored using cone
Generally cold drinks cold Parameter Reference :
Types of cold storage
Dimensions 3 * 5 * 2.2 (mm)
Power 3 (kw)
System temperature range -10/-23 (℃)
Capacity 30 ( m )
Power Consumption 30 (kwh/24h)
★ Solution:
Cold drinks cold , cold ice cream , ice cream cold coil mode using refrigeration , refrigeration , energy saving and environmental protection. Preparation of refrigeration units , external cooling fan . Refrigerator thermostat to control the temperature of electrical box .
Advantages of cold storage
( 1 ) Good thermal capacity exhaust pipe cold : aluminum with excellent thermal capacity , the evaporation temperature of the refrigerant and the temperature difference between the surface of the aluminum exclusion will reduce evaporation temperature will increase, increase energy efficiency compressors , reducing energy consumption.
( 2 ) rows of tubes cold special structure : aluminum fins and aluminum alloy fins parallel to the tube , to form a sheet shape , the sheet shaped aluminum fins discharge tube is fixed in parallel to form a plurality of parallel channels in the cooling system when the cold air in the channel formed flue effect is accelerated sink , convection accelerated so fast cooling speed reaches the set temperature of the compressor stops running, save a lot of energy.
( 3 ) rows of tubes cold set , high efficiency: the evaporation area and the projected area ratio of aluminum row can be one to three or one to four , so that discharge can be installed in all the aluminum top surface of the refrigerator , so that one can the heat capacity per unit area higher than the use of more energy efficient discharge wall , which has a second cold accumulating effect of frequent starting rate of decrease of the compressor , a saving of power consumption.
( 4 ) Light weight , easy to install : the weight of aluminum row evaporator area ratio is about one- sixth of Ф38 steel , easy installation can save a lot of structure investment ;
( 5 ) cold refrigerant discharge pipe less : aluminum row fin tube using a thread structure in the outer flap , the amount of refrigerant charge will be greatly reduced , saving the cost of the refrigerant .
( 6 ) the system clean and prolong compressor life: the inner tube is specially treated to ensure clean interior aluminum row . Anti-corrosion ability of the alloy grades, the surface through a special process , long life , and in line with food hygiene standards.
( 7 ) electric defrost function : use long-life , high-temperature , high- grade electrical insulation heating wire , and with a receiving tank , exhaust pipe end of the cold frost difficult problem .
( 8 ) high voltage discharge tube : aluminum fin and tube die cast structure, strength and aluminum fins mutual improved, aluminum pressure also greatly improved, have been 2.5MP airtight inspection at the factory , doing 4.5 MP withstand life test , the aluminum row unharmed.
- Cold Industry Solutio
- Cold Industry Solution Center